[cctalk] RK11-D register address assignment

The "RK11-D and RK11-E moving head disk drive controller manual" (EK-RK11D-MM-002) states in par. 2.5 (Installation Procedure) that the register and vector addresses of a RK11-D can be configured by "seven interrupt vector address jumpers and eight address selection jumpers of the M7257". The manual however doesn't state the address range that can be configured by these jumpers and refers to engineering drawing D-CS-M7257-0-1 for that information. I found these drawings in the RK11-D Engineering Drawings but cannot find information in them on the valid address ranges. Therefore my question: what is the address range a RK11 controller can be configured for?