31 Jul
2022
31 Jul
'22
8:13 p.m.
I would get it working on simH and then make an RL02 from the working
image. PDP GUI is what I use for stuff like that.
On Fri, Jul 29, 2022 at 11:00 AM Bill Gunshannon via cctalk <
cctalk(a)classiccmp.org> wrote:
On 7/29/22 10:53, Chris Zach via cctalk wrote:
I know you can run 7m as I have a couple of RL01
packs with 7m on them.
You needed two drives.
RSX11/M 4.2 would probably be the best OS for a 34.
On 7/26/2022 11:52 PM, devin davison via cctalk wrote:
> Hello,
>
> Been a while since i last posted here.
>
> I have a few pdp 11/34 systems. The drives i am using are RL02 drives.
>
> Is it possible to install Ultrix on a 34? I have been testing out
> Ultrix in
> the simh emulator. I see during the install the 34 mentioned as a
> recognized cpu type, but later in the install the system hangs. This
hang
> does not occur if i emulate a later cpu
system like the 11/83.
>
> Not sure if ultrix can be installed due to the memory limitation, if
not,
> rsx will be my second choice.
>
> Hoping to have some real hardware running soon!
>
> Thanks,
>
> Devin D.
I didn't try installing but I grabbed a couple RL02 images I
already had and booted an 11/34 with them so it will run. I
may try an install and see what happens.
bill