Or it was removed and the config wasn’t updated.
Sent from my iPhone
On Jun 14, 2023, at 14:47, Bill Degnan via cctalk
<cctalk(a)classiccmp.org> wrote:
Obviously I opened the box. So Inguess the Turbo board is just
"motherboard"
Bill
> On Wed, Jun 14, 2023, 4:21 PM Chris Zach via cctalk <cctalk(a)classiccmp.org>
> wrote:
>
> I used to use (and service) PC Limited stuff back in the 90's at Macro.
> I don't remember a turbo board, just a normal XT system board. Pop the
> case open and check.
>
> If I recall PC Limited and Dell (what they became) came with call in
> service from Xerox. Maybe give them a call? ;-)
>
> CZ
>
>> On 6/14/2023 1:08 PM, Wayne S via cctalk wrote:
>> Open it up and take a look. Maybe the daughterboard it there and just
> needs reseating.
>>
>> Sent from my iPhone
>>
>>> On Jun 14, 2023, at 07:26, Bill Degnan via cctalk <
> cctalk(a)classiccmp.org> wrote:
>>>
>>> I am getting an error message when I boot up a recently donated PCs
> Limited
>>> XT clone. The error is
>>>
>>> ARC Turbo Board
>>> X Turbo System Error # 04
>>>
>>> Does anyone have one of these boards, I believe the error means the
> board
>>> has been removed, and the system can't find it/bad board. If so,
please
>>> advise the $$.
>>>
>>> I don't think the board is specific to PCs Limted, I found a general
> manual
>>> called "Turbo-XT Main Board" that seems to be the OEM of the PCs
>>> Limited-branded motherboard. I assume there is a separate daughterboard
>>> the the "Turbo" part. Yes?
>>>
>>> Thanks
>>>
>>> Bill
>