3 Sep
2022
3 Sep
'22
9:07 a.m.
On 9/2/22 11:59, Chuck Guzis via cctalk wrote:
On 9/2/22 11:15, Tom Gardner via cctalk wrote:
I hope you get information on Don Tarbell's work included. He had an
early single density controller. Then later a high (double) density
controller.
He of course had huge success with his tape reader design, and was
following his interests in storage.
I wish I had good references if they aren't already on Wiki or
elsewhere, only my recollections. I knew him and his manufacturing
friend, Don Culbertson, who did a lot of his manufacturing. But don't
have anything up to wiki requirements for citation.
thanks
Jim
I’m working on an update to Wikipedia on floppy
disk drive controllers –
there is a nice section on WD but nothing on Intel/NEC
Anyone know the history of how the NEC µPD765 and the Intel 8272 became
compatible devices?
The 8272/µPD765 as well as the graphics controllers (µPD7220: Intel
82720) were the result of a cross-licensing deal between NEC and Intel.
Both were essentially NEC designs. The 765 is described in detail in
the 1980 NEC catalog:
http://blog.kevtris.org/blogfiles/Handhelds/Datasheets/1980%20NEC%20Catalog…
The 7220 came a bit later. The Intel FDC that preceded the 8272, the
8271 was single-density only and doesn't resemble the 8272 at all.
It's obvious from the abovementioned NEC catalog that the extent of
licensing peripheral chips from Intel was pretty broad. The whole
affair continued peacefully until the V20, where Intel sued NEC for
pirating the 8086 microcode, which is an interesting read all by itself.
--Chuck