[cctalk] Re: Dec pdp 11 ultrix

I'd start with version 6 on an 11/34 first unless you are sure you have have the required hardware for There are a few disk pack images out there but not many, you might have to start with what you can find B On Fri, Jul 29, 2022, 11:35 PM Chris Zach via cctalk &lt;cctalk(a)classiccmp.org&gt; wrote: > 7m was the Bell Labs unix that came after v6. I've got the disks > somewhere around here, are there other copies out there? > > CZ > > On 7/29/2022 10:52 PM, devin davison wrote: >> Thank you for the suggestion, but what is 7m? i have done a few seacches >> but not turned up much. >> >> Sounds promising, if i can find install media ill give it a try in simh. >> >> Thanks, >> >> Devin D. >> >> >> >> >> On Fri, Jul 29, 2022, 10:53 AM Chris Zach via cctalk >> &lt;cctalk(a)classiccmp.org <mailto:cctalk@classiccmp.org>> wrote: >> >> I know you can run 7m as I have a couple of RL01 packs with 7m on > them. >> You needed two drives. >> >> RSX11/M 4.2 would probably be the best OS for a 34. >> >> On 7/26/2022 11:52 PM, devin davison via cctalk wrote: >> > Hello, >> > >> > Been a while since i last posted here. >> > >> > I have a few pdp 11/34 systems. The drives i am using are RL02 >> drives. >> > >> > Is it possible to install Ultrix on a 34? I have been testing out >> Ultrix in >> > the simh emulator. I see during the install the 34 mentioned as a >> > recognized cpu type, but later in the install the system hangs. >> This hang >> > does not occur if i emulate a later cpu system like the 11/83. >> > >> > Not sure if ultrix can be installed due to the memory limitation, >> if not, >> > rsx will be my second choice. >> > >> > Hoping to have some real hardware running soon! >> > >> > Thanks, >> > >> > Devin D. >> >