[cctalk] Re: vic-20 basic on cartridge

I got a vic-20 in a painted case, with a biacom label, and a modified VIC-1110 8kb memory, where there have been added a 8kb eprom have been to the left side where the additional 8kb could be installed. https://telefisk.org/biacom_8kb_a000+8kbmem.rom https://telefisk.org/biacom_basic.txt The autostart rom code, that disables runstop, moves and starts basic , does seem to initialize everthing like a normal start does. Adding the rom to vice without reset and do a poke 44,161, to move the basic start to 41216, one can look at the code. The software seems to be made to print signs, but I havent had much luck getting vice to print, I only get a blank page. Looking at the code line 60 # Line Spacing of n/216 inch chr$(27) "3" chr$(n) line 61 # chr$(14) One-line Expanded Print # chr$(20) cancel expanded print line 68 # single density 60dpi line lenght 135 + (256*1) does look like it match up to the commodore/epson codes, printing the basic list with open1,4,7:print#1:cmd1:list works in text and graphics for the mps80x, but not from the basic code there. Wonder if I am running into a bug with the print emulation or it was made to use a different printer ? Regards -- Jacob Dahl Pind | telefisk.org | fidonet 2:230/38.8