27 Feb
2023
27 Feb
'23
9:22 p.m.
Actually it's not the controller, it is the fact that the head gap on
the 48 tpi drive is twice as wide as on the 96TPI drive.
So the actual head sees the magnetic fluxes from two different tracks,
This looks like noise to the data separator on the controller.
The way around this was to magnetically erase a disk and format it and
write it on a double stepped on a 96tpi drive and only read it in a 48
tpi drive.
This is what we had to do when I wrote the floppy formatter for Gimix
6800 and 6809 Flex and OS/9. The floppy driver also had an option to
double step the drive for normal Flex operation.
On 2/27/2023 2:55 PM, r.stricklin via cctalk wrote:
On Feb 27,
2023, at 10:21 AM, Mike Katz via cctalk <cctalk(a)classiccmp.org> wrote:
the drive would see half the new data and half the old data.
I think that
explaining it this way can easily lead to an incorrect inference on the part of an
arbitrary hypothetical neophyte that what is going on in the drive in such a case is that
the head can equally well read either the old data or the new data but the controller
can’t distinguish which is which, or might return old data, or might return new data, or
might indiscriminately return some old data and some new.
What the drive reads in such a case is noise, because the wider head picks up a
superposition of the old (wide) 48tpi track data AND the new (narrow) 96tpi track data,
simultaneously.
ok
bear.