[cctalk] Re: LCM STL Files for 3D Printing of DEC PSU Chassis

On Oct 15, 2024, at 8:11 AM, hupfadekroua via cctalk <cctalk(a)classiccmp.org> wrote: Next try … https://flic.kr/s/aHBqjBMV48 A. > Am 15.10.2024 um 15:28 schrieb Milo Velimirović <milovelimirovic(a)gmail.com>om>: > > The photos didn’t make it through. I’ve got a pdp11/05 that I’d like to restore and new PSUs make total sense to me. Please send photos directly. > > Thanks! > —Milo > >> On Oct 12, 2024, at 6:35 AM, hupfadekroua via cctalk <cctalk(a)classiccmp.org> wrote: >> >> Hi all, >> >> Once I visited LCM some years ago I was allowed to visit their repair laboratory. >> >> I was introduced to an approach to substitute DEC BA11 PSU modules by modern DC-DC converter modules. >> >> They used a 3D printed plastic chassis to mount the converter, electrolytic as well as the connectors to be fitted into the psu chassis of a BA11 enclosure, quite nice. >> >> See photo attached … >> >> Does someone knows if this stl or design has been saved while or after LCMs closure? >> >> Best >> >> Andreas >