If the PSU requires too much hacking, you may just want to replace with a modern Mean-Well
switcher or two. The Aztec supplies used in those Xerox enclosures are OK but nothing
stellar. I recapped mine (it also showed signs of electrolytic leakage) and it did work so
I kept it, but if it'd had issues I'd have junked it.
Thanks,
Jonathan
------- Original Message -------
On Thursday, October 13th, 2022 at 09:32, D. Resor via cctalk
<cctalk(a)classiccmp.org> wrote:
I do understand that these are common film capacitor types. There is one more smaller
.10ufa RIFA branded capacitor hiding near the center of the PWB.
A couple reasons I'd like to have a circuit diagram is to know what the RIFA
capacitors purpose are. The other is, a couple of the electrolytic capacitor are double
covered with what appears to be rubbery heat shrink tubing, therefore I cannot read what
their value are.
One of these two electrolytic capacitor appears to have a dried substance around the top.
The over-pressure venting cuts in the top of these two capacitors are not split. At this
point I cannot tell if it is dried electrolyte, cement to hold the sleeve on, or possibly
paper.
Looking at these two again, it definitely could be dried electrolyte. I have seen it
creep out and up into strange places.
https://www.dropbox.com/s/18hzfdqe96vmgsr/electrolytics.jpg?dl=0
Seems someone was in hurry on the day this PS was tested. I cannot make out date, is it
1983?
https://www.dropbox.com/s/zlt2ocpqulil13j/pssticker.jpg?dl=0
What type are the diodes, their rating etc.? I seem to remember this type with a black
band were rated at 3 amps, but that's all I remember.
The TO-3 transistor/regulator has no P/N silkscreened on it.
Having a circuit diagram helps to cover many bases. Apparently it's an Astec
AA12070.
Placed the PS board back in the garage to continue airing out! 😉
Don Resor
-----Original Message-----
From: Joshua Rice via cctalk cctalk(a)classiccmp.org
Sent: Thursday, October 13, 2022 4:43 AM
To: General Discussion: On-Topic and Off-Topic Posts cctalk(a)classiccmp.org
Cc: Joshua Rice rice43(a)btinternet.com
Subject: [cctalk] Re: Xerox 820II U07 Power Supply magic smoke....
You shouldn't need a schematic. These thin film caps are a common failure mode on a
multitude of PSUs. Just replace like for like. Thin film X and X2 rated caps are easily
found from your favorite electronics part retailer.
If it's gold and got RIFA on it, replace it, though. Just because it hasn't
popped, doesn't mean it wont pop in the near future.
I've learned now, to always check every PSU or other mains-powered vintage equipment
for these little stinkbombs. If they're present, i'll always replace.
Cheers, Josh
------ Original Message ------
From: "D. Resor via cctalk" cctalk(a)classiccmp.org
To: "Classic Computer Mailing List" cctalk(a)classiccmp.org
Cc: "D. Resor" organlists1(a)sonic.net
Sent: Thursday, 13 Oct, 2022 At 12:24
Subject: [cctalk] Xerox 820II U07 Power Supply magic smoke....
Where might I find a schematic diagram for the Xerox U07 8" FDD,HDD expansion
cabinet for the 820II, and/or the 105P80450 power supply?
The Xerox Professional Computer Technical Reference Manual I downloaded from
bitsavers.org doesn't seem to have those particular schematic diagrams.
For your enjoyment the part which smoked.
https://www.dropbox.com/s/al9kx3yw9ypwp89/Xerox105p80450.jpg?dl=0
https://www.dropbox.com/s/al9kx3yw9ypwp89/Xerox105p80450.jpg?dl=0
I certainly am glad I have the lid off while testing. Unfortunately these capacitors
which appear to be film type were hidden from view.
The fuse didn't blow, but that .22uf 250v capacitor certainly stunk up the house. It
smelled like burnt popcorn, plastic and the bottom of a coffee pot which has boiled dry,
yech!
I know that if I had pulled the power supply board first I might have seen the physical
cracks in these boxed capacitors.
Wasn't it Marc V. that said in one of his videos, you don't need to shotgun them
all! Oi, lol It's when things like this happen that I most always worry about not
going over vintage equipment fine tooth comb.
Don Resor