31 Jul
2022
31 Jul
'22
4:03 p.m.
I'd start with version 6 on an 11/34 first unless you are sure you have
have the required hardware for
There are a few disk pack images out there but not many, you might have to
start with what you can find
B
On Fri, Jul 29, 2022, 11:35 PM Chris Zach via cctalk <cctalk(a)classiccmp.org>
wrote:
7m was the Bell Labs unix that came after v6. I've
got the disks
somewhere around here, are there other copies out there?
CZ
On 7/29/2022 10:52 PM, devin davison wrote:
Thank you for the suggestion, but what is 7m? i
have done a few seacches
but not turned up much.
Sounds promising, if i can find install media ill give it a try in simh.
Thanks,
Devin D.
On Fri, Jul 29, 2022, 10:53 AM Chris Zach via cctalk
<cctalk(a)classiccmp.org <mailto:cctalk@classiccmp.org>> wrote:
I know you can run 7m as I have a couple of RL01 packs with 7m on
them.
You needed two drives.
RSX11/M 4.2 would probably be the best OS for a 34.
On 7/26/2022 11:52 PM, devin davison via cctalk wrote:
Hello,
Been a while since i last posted here.
I have a few pdp 11/34 systems. The drives i am using are RL02
drives.
Is it possible to install Ultrix on a 34? I have been testing out
Ultrix in
the simh emulator. I see during the install the
34 mentioned as a
recognized cpu type, but later in the install the system hangs.
This hang
does not occur if i emulate a later cpu system
like the 11/83.
Not sure if ultrix can be installed due to the memory limitation,
if not,
rsx will be my second choice.
Hoping to have some real hardware running soon!
Thanks,
Devin D.