[cctalk] Re: Using teledisk images on a Gotek

Chris -- I did something similar with my Gazelle images for use with the Gotek. My images are in IMD which I then had to convert to HxC for use with the FlashFloppy software. So, what I would try is TD0->IMD (using one of Dave's tools) and then IMD->HxC using the HxC software for use with FF. Rich On 2/23/23, 9:04 AM, "Chris Zach via cctalk" &lt;cctalk(a)classiccmp.org <mailto:cctalk@classiccmp.org>> wrote: Question: I'm starting to work on the concept of installing POS 3.2 on my Pro380 and rather than burning a lot of floppies I'd rather just use my Gotek with FlashFloppy. First problem is this: The images are in lzh format, and when uncompressed are TD0 format. Which I think is teledisk, is there a way to convert those to the raw format used by Flashfloppy? Ultimate goal is to get Pro/Decnet running, hook the 380 up to the Ethernet here with my DECNA to the 11/73 running DEQNA, then try sysgenning a version of RSX11M+ for the Pro that does not suck. Not sure if anyone has tried this, or where they ran into roadblocks. Thanks! CZ