17 Jan
2025
17 Jan
'25
6:40 a.m.
Hi Doug,
Chris Tersteeg over at Vcfed designed a very nice front panel (FP6120
replacement) and also a 3D printed case for the SBC6120.
Check out the following thread:
https://forum.vcfed.org/index.php?threads/sbc6120-mini-front-panel.1245272/
All the design files including build instructions, Gerbers, BOM and STL
files are available from GIThub:
https://github.com/djtersteegc/sbc6120-mini-front-panel
If you have no SBC6120 CPU board you can build a new one using a PCB
redesign from Retrobrew:
https://www.retrobrewcomputers.org/doku.php?id=boards:sbc:sbc6120-rbc-editi…
Gerbers, BOM, software and build instructions for the SBC6120 CPU board are
available from the link above (see the "File List" at the bottom of the
Retrobrew page).
Enjoy
Tom
On Tue, Jan 14, 2025 at 8:37 PM Doug Jackson via cctalk <
cctalk(a)classiccmp.org> wrote:
Hi Dave,
I'll send this to the group, I suspect my email made it into your spam.
Doug
---------- Forwarded message ---------
From: Doug Jackson <doug(a)doughq.com>
Date: Tue, 14 Jan 2025, 6:05 am
Subject: Re: SBC6128
To: <dave.g4ugm(a)gmail.com>
Hi Dave,
I was just researching the IOB6120 (I had an 8 at the end of the model..
sigh - memory is often faulty)
WOW - I had no idea that existed. I also had no idea that the
community picked up Bob's designs and ran with them so enthusiastically - I
feel like I have been under a rock for quite a while.
I would be very very happy to purchase your board + IOB that you have put
together - If the enclosure is not ideal, I am very happy to update that -
these little boards are awesome.
Just let me know a Paypal address and shipping details.
Kindest regards,
Doug Jackson
em: doug(a)doughq.com
ph: 0414 986878
Follow my amateur radio adventures at vk1zdj.net
On Tue, 14 Jan 2025 at 05:37, Doug Jackson <doug(a)doughq.com> wrote:
Hi Dave,
Thanks so much for that.
Yes, postage is a pain, but necessary.
If you are not using it, then the partially built one makes sense
(assuming you can find the programable logic and CPU).
Failing that, then I don't mind paying the 250 Pounds for the built board
as long as it's complete :-) As I said, I was devastated.
Are you able to double check and send me some photos.
For a shipping address, I am at:
Doug Jackson
5 Pinschof Place,
Gordn, ACT, 2906
Australia
+61 414 986878
Kindest regards,
Doug Jackson
em: doug(a)doughq.com
ph: 0414 986878
Follow my amateur radio adventures at vk1zdj.net