Mate-n-lok connector for H744 Regulator

[pbirkel at gmail.com]

See the bottom of:

https://gunkies.org/wiki/DEC_standard_modular_regulators

I believe that you'll want one or more of these:

https://www.connectorpeople.com/Connector/TYCO-AMP-TE_CONNECTIVITY/1/1-48046
0-0
https://www.connectorpeople.com/Connector/TYCO-AMP-TE_CONNECTIVITY/1/1-48045
9-0

Note that both have a minimum order :-<.  As for pins:

https://www.mouser.com/ProductDetail/TE-Connectivity/60620-1?qs=pn%2Fzyis3Xj
HkDeV60Xt%252Btg%3D%3D 
https://www.mouser.com/ProductDetail/TE-Connectivity-AMP/60619-1?qs=sGAEpiMZ
ZMueQxo7L%2FBPyOx7s9t3UY8b 


-----Original Message-----
From: cctalk <cctalk-bounces at classiccmp.org> On Behalf Of Rob Jarratt via
cctalk
Sent: Saturday, January 8, 2022 8:27 AM
To: General Discussion: On-Topic and Off-Topic Posts <cctalk at classiccmp.org>
Subject: Mate-n-lok connector for H744 Regulator

To make testing of the H744 a bit easier I would like to try to make up some
connectors for the mate-n-lok connector to make it easier to connect power
and load. I know the H744 uses a mate-n-lok connector, but there seem to be
a lot of different types and I don't seem to be able to find a type that
would work. Does anyone know what the correct one is?

 

Thanks

 

Rob