idea for a universal disk interface

shadoooo shadoooo at gmail.com
Sun Apr 17 12:28:21 CDT 2022


hello,
there's much discussion about the right  method to transfer data in and out.
Of course there are several methods, the right one must be carefully chosen after some review of all the disk interfaces that must be supported. The idea of having a copy of the whole disk in RAM is OK, assuming that a maximum size of around 512MB is required, as the RAM is also needed for the OS, and for Zynq maximum is 1GB.
About logic implementation, we know that the device must be able to work with one cylinder at a time. Given RAM bandwidth, this doesn't means that it must fit completely in blockram, also it can be produced at output while it is read, so delay time is really the time between first data request and actual read response. In between an elastic FIFO is required to adapt synchronous constant rate transfer of the disk to the burst transfer toward RAM.

Guy, you mentioned about development of a similar interface.
So you already produced some working hardware?

Andrea



More information about the cctech mailing list