How to read Osborne 1 Floppies?

[Fred Cisin]

Imagedisk is great for making images.

BUT, the original request is not for images, it is for the previous 
owned wanting access to be able to use the content of the FILES that are 
in those images.


On Tue, 25 May 2021, Tom Hunter wrote:

> Dunfield's ImageDisk reads and writes them just fine on most older PCs with
> a decent floppy controller.
> As Chuck G writes "TestFDC" will tell you if the floppy controller is
> usable for imaging.
>
> Best regards
> Tom Hunter
>
> On Tue, May 25, 2021 at 2:26 AM Fred Cisin via cctalk <cctalk at classiccmp.org>
> wrote:
>
>> There were two Osborne floppy formats.  Both CP/M.
>>
>> IIRC, the original format was "Single Density" (FM), 10 sectors per track,
>> with 256 bytes per sector (similar to the TRS80-Model-1.  That will
>> require FM/SD capability.  Most NEC FDCs did not support that.  Dave
>> Dunfield has a test program that will tell you whether your FDC can handle
>> it.
>>
>> Then, they switched to "Double Density" (MFM) IIRC: 5 sectors per track,
>> with 1024 bytes per sector.  Any PC FDC with access to INT13h and INT1Eh
>> will work with appropriate software.  (NOT external USB drives)
>>
>>
>> WITH appropriate software, a flux transition device, such as your
>> Catweasel, could do it.
>>
>>
>>
>> On Mon, 24 May 2021, Zane Healy via cctalk wrote:
>>
>>> A photographer I know contacted me last night asking about reading
>> Osborne 1 floppies.  What does it take to read these?
>>>
>>> The only Catweasel board I have is the old Zorro 2 board for the Amiga.
>> I do have 5.25” floppy drives.  Neither of us have an Osborne anymore (I
>> think mine went to Jim Willing).
>>>
>>> Zane