SCSI2SD

Zane Healy healyzh at avanthar.com
Sat May 22 10:29:50 CDT 2021


On May 21, 2021, at 5:15 PM, John H. Reinhardt via cctalk <cctalk at classiccmp.org> wrote:
> 
> On 5/21/2021 3:41 PM, Zane Healy via cctalk wrote:
>> Does anyone have experience using a SCSI2SD board to replace a Hard Drive on a VAXstation or an AlphaStation?  I’m thinking about using them on some of my systems to reduce the amount of noise.  I’ve gotten used to a quiet office. :-)
>> 
>> Zane
>> 
>> 
>> 
> 
> I've got a SCSI2SD V5 in my MicroVAX 3100 M95. It sits on the SCSI bus along with the CDrom drive and a couple of 18GB Compaq/Seagate drives.  I've also got a SCSI2SD V6 in each of my two AlphaSever DS10 systems.  I had a few issues with the MV and an earlier version of the V5 firmware, but the last few versions have been no trouble at all.
> 
> In the MV3100 I mounted the SCSI2SD on a 3.5" 3-D printed mount which is mounted on a 3.5" to 5.25" mount and it's mounted in the front opening next to the CDROM drive.
> 
> In the DS10's the 3.5" 3-D printed mount is put in the floppy opening.

This is definitely good info John, how is the SCSI2SD performance on the DS10’s?  I’m pondering using either an AlphaStation 200 4/233 or a AlphaStation 500/333 as a workstation, rather than my DEC PWS 433a or my Compaq XP1000/667, simply due to power usage, and heat generation.

I just placed an order for the initial 4 V5.2 boards I’ll need.  Once they have V6 boards back in stock, I’ll need to order a couple of those as well.  These should definitely help reduce heat, noise, and power consumption.

Zane




More information about the cctech mailing list