Melted computer feet
Zane Healy
healyzh at avanthar.com
Wed May 19 22:11:32 CDT 2021
Good advice, though oddly enough, this is grey, rather than the normal black.
Zane
> On May 19, 2021, at 6:32 PM, Doug Jackson via cctalk <cctalk at classiccmp.org> wrote:
>
> I use any of the 'Orange' based goo gone type cleaners for labels.
>
> Be careful to have an absorbent tissue. Once the black goo has been
> dissolved, mop it up quickly - otherwise in the next few weeks you will
> find black smears everywhere wnd wonder where they came from.
>
>
> Kindest regards,
>
> Doug Jackson
>
> em: doug at doughq.com
> ph: 0414 986878
>
> Check out my awesome clocks at www.dougswordclocks.com
> Follow my amateur radio adventures at vk1zdj.net
>
> -----------------------------------------------------------
>
> Just like an old fashioned letter, this email and any files transmitted
> with it should probably be treated as confidential and intended solely for
> your own use.
>
> Please note that any interesting spelling is usually my own and may have
> been caused by fat thumbs on a tiny tiny keyboard.
>
> Should any part of this message prove to be useful in the event of the
> imminent Zombie Apocalypse then the sender bears no personal, legal, or
> moral responsibility for any outcome resulting from its usage unless the
> result of said usage is the unlikely defeat of the Zombie Hordes in which
> case the sender takes full credit without any theoretical or actual legal
> liability. :-)
>
> Be nice to your parents.
>
> Go outside and do something awesome - Draw, paint, walk, setup a
> radio station, go fishing or sailing - just do something that makes you
> happy.
>
> ^G ^G ^G ^G ^G ^G ^G ^G- In more laid back days this line would literally
> sing ^G ^G ^G ^G ^G ^G ^G ^G
>
>
>
>
> On Thu, 20 May 2021 at 10:52, David Collins via cctalk <
> cctalk at classiccmp.org> wrote:
>
>> Goo Gone is one option but may harm the plastic case.
>>
>> Orange based cleaners are also good - the ones that remove stickers etc
>>
>> Sent from my iPad
>>
>>> On 20 May 2021, at 10:50 am, Zane Healy via cctalk <
>> cctalk at classiccmp.org> wrote:
>>>
>>> Is there any recommended method for cleaning up melted “rubber” feet on
>> a plastic case?
>>>
>>> I’m trying to determine if I can revive the VAXstation 4000/90 I
>> received from a list member, back around 1998 (it’s never worked). When I
>> pulled it out, I discovered that its feet have melted, and I’m assuming
>> probably made a mess on the disk enclosure for my VAXstation 3100 that it
>> was on top of.
>>>
>>> Zane
>>>
>>>
>>>
>>
More information about the cctech
mailing list