Intellec MCS-8 8008 monitor program ROM files

[Tony Aiuto]

FWIW, I have an MCS-8 User Manual I was about to give away.
https://photos.google.com/photo/AF1QipPxTeFNI5YY-Ig_xZihpEyeaVjivCjDrU1_vmOa
If either of you want it, it's yours.

On Wed, Mar 3, 2021 at 11:48 AM Bill Degnan via cctech <
cctech at classiccmp.org> wrote:

> Although this may not be what you're looking for, it's in the ballpark
> (newer version?):  Note the board part number and compare with yours, I
> don't see off hand which board exactly you have.
> https://www.vintagecomputer.net/intel/IMM_6-26/
> Bill
>
> On Wed, Mar 3, 2021 at 11:25 AM Jon Elson via cctech <
> cctech at classiccmp.org>
> wrote:
>
> > On 03/03/2021 07:17 AM, Roland via cctech wrote:
> > > Hello everyone,
> > > Does anyone have the Intellec MCS-8 8008 system monitor ROM files?
> > > According to the Intellec MCS-8 manual the System Monitor is contained
> > in five 1702A PROMs.My ROMs have a disk loader, but the disks system is
> > long gone...
> > >
> > > Any papertape software is also welcome for this machine!
> > > Thanks in advance!Regards, Roland Huisman
> > >
> > Wow, I have an old 8008-based embedded device I built back
> > in 1976. It has the MCS 8008 CPU board, 1702 EPROM board and
> > a RAM board.  I never had the system monitor, I did
> > everything on that project "bare iron".  I think I did
> > development with a PDP-11 and a homebrew cross assembler.
> >
> > Jon
> >
>