Pro-Log M980 Programmer

[Randy Dawson]

I had a Data I/O 29B with a serial interface and I assume your Pro-Log is similar.
Cabled up and baud correct you should get a menu on a CR with your host.
Mine took an Intel or Motorala ASCI HEX string on power up without any commands or prompts.
Randy

________________________________
From: cctalk <cctalk-bounces at classiccmp.org> on behalf of DI Gerhard Kreuzer via cctalk <cctalk at classiccmp.org>
Sent: Saturday, July 24, 2021 2:36 AM
To: cctalk at classiccmp.org <cctalk at classiccmp.org>
Subject: Pro-Log M980 Programmer

Hi,
  I own a Pro-Log M980 Prom Programmer and want to program a 2732 EProm. I
have everything needed, but how can I get the data in?
  There is a serial interface, did anybody have some program for a standard
PC to handle that daa transfer?
  Cabling istn't an issue, can do it.

  Thanks for helping.

  With best regards

  Gerhard