cc:Mail Router for NT

[Tomas By]

Hi again everybody,

Apparently the router program ignores the baud parameter when the
`PBX' option is used (or maybe it is the phase of the moon), so I am
specifying the serial port speed using the DOS `mode' command, before
starting the router.

Here is the output:

| C:\CCMAIL\Router>C:\CCMAIL\Router\NTROUTER.EXE C:\CCDATA COM1 MODEM/PBX
| cc:Mail NT ROUTER Version 6.10.00.4
| Copyright (c) 1986, 1997 by cc:Mail, Inc., a wholly owned subsidiary of
| Lotus Development Corporation. All rights reserved. This software is subject
| to the Lotus Software Agreement, Restricted Rights for U.S. government users,
| and applicable export regulations.
|
| Press Esc to terminate cc:Mail ROUTER program.
| Waiting to receive messages...
| 9/1/21 21:10 Answering call...   2   4   7  ff  68  c4
| Packets enabled.
| Handshake recvd.
|   Data connection not requested.
| Bad Packet Summary -- Naks sent: 0 recv: 0 Retrans: 0
| 9/1/21 21:10 Ending connection.
| Waiting to receive messages...
| 9/1/21 21:10 Answering call...   2   4   7  ff  68  c4
| Packets enabled.
| Handshake recvd.

(roughly here, the Palmtop displays the message "could not connect")

|   Data connection not requested.
| Bad Packet Summary -- Naks sent: 0 recv: 0 Retrans: 0
| 9/1/21 21:11 Ending connection.
| Waiting to receive messages...

What is it I am missing?

Is there nobody here who remembers this stuff? It's only been twenty years.

/Tomas


On Wed, 23 Dec 2020 14:09:24 +0100, Tomas By via cctalk wrote:
> Hi all,
> 
> I'm using a HP 200LX to connect to a cc:Mail installation, with a null
> modem cable. It has worked better before, but now I don't seem to be
> able to connect at all. [...]