Need picture of power supply mounted in 11/40 cabinet

[Bill Degnan]

I have seen both upper and lower...if you fish through you can find what
you need here:

https://www.vintagecomputer.net/digital/PDP11-40/
https://www.vintagecomputer.net/digital/PDP11-40_full-height/
https://www.vintagecomputer.net/digital/PDP11-40_industrial11/

Bill

On Mon, Dec 6, 2021 at 2:03 PM Gregory Beat via cctech <
cctech at classiccmp.org> wrote:

> Power Supplies, due to their Weight, are placed at the bottom of Racks
> (prevent tip overs / weight distribution).
> https://avitech.com.au/?page_id=366
>
> The PDP-11/70 Maintenance and Installation Manual (EK-11070-MM-002)
> explains that the basic PDP-11/70 system components are located in a double
> cabinet as shown in Figure 1-1 of that manual.
>
> https://i0.wp.com/avitech.com.au/wp-content/uploads/2016/05/major-assemblies-fig-1-1.jpg
>
> greg
>
> > Date: Sat, 4 Dec 2021 19:28:01 -0800
> > From: Marc Howard <cramcram at gmail.com>
> > To: "General Discussion: On-Topic Posts Only" <cctech at classiccmp.org>
> > Subject: Need picture of power supply mounted in 11/40 cabinet
>
>