Remote job submission from PDP-11

[Ethan Dicks]

On Wed, Oct 7, 2020 at 1:50 PM Al Kossow via cctalk
<cctalk at classiccmp.org> wrote:
> On 10/7/20 10:32 AM, Ethan Dicks via cctalk wrote:
>
> > Using a KMC11 is similar
>
> Other than the KMC being a Unibus bandwidth hog.

Similar in principle, not in implementation.

COMBOARDs were quite well behaved.  The DMA engine was PIO on the M68K
side so max bandwidth, even from a tight Bcc loop, was ~200KB/sec

-ethan