Wanted, Papertape Reader for Archiving Tapes

dwight dkelvey at hotmail.com
Sat May 2 10:25:44 CDT 2020


I've got a rebadged Remex someplace but it is intended for fan fold. It takes manual watching to deal with spooled tapes. It is a high speed optical with parallel. On spooled stuff, I'd set it up on a table with it hanging over the edge a little. Then I'd have a piece of scrap plywood as a separator for input and output piles. Being high speed, it can make a real mess if the output gets tangles with the input.
Dwight

________________________________
From: cctech <cctech-bounces at classiccmp.org> on behalf of Bill Degnan via cctech <cctech at classiccmp.org>
Sent: Saturday, May 2, 2020 7:35 AM
To: davidkcollins2 at gmail.com <davidkcollins2 at gmail.com>; General Discussion: On-Topic Posts <cctech at classiccmp.org>
Subject: Re: Wanted, Papertape Reader for Archiving Tapes

On Sat, May 2, 2020, 7:49 AM David Collins via cctech <cctech at classiccmp.org>
wrote:

> I've pulled together details of the controller used with an HP2748 paper
> tape reader to dump a bunch of tapes from the HP Computer Museum's
> collection with the help of J. David Bryan.
>
> The details are at this link..
>
> https://drive.google.com/open?id=1KaJkVgYzPusJN9tLf4IaSIa104fvLhUs
>
> The unit and Arduino code are both pretty rough and ready and I'm sure can
> be improved - but they served their purpose!
>
> Hope it is of use to others...
>
> Now to get those new tape files published...
>
> David Collins
> www.hpmuseum.net<http://www.hpmuseum.net>
>
>
> -----Original Message-----
> From: David Collins <davidkcollins2 at gmail.com>
> Sent: Wednesday, 29 April 2020 7:34 AM
> To: J. David Bryan <jdbryan at acm.org>; General Discussion: On-Topic Posts <
> cctech at classiccmp.org>
> Subject: Re: Wanted, Papertape Reader for Archiving Tapes
>
> Further to Dave’s post below, I’m happy to share the Arduino code and
> schematic if anyone has a suitable reader and wants to try it. It was
> indeed designed to interface to the HP2748 but is pretty simple and could
> be adapted to any similar reader.
>
> David Collins
>
> Sent from my iPad
>
> > On 29 Apr 2020, at 6:33 am, J. David Bryan via cctech <
> cctech at classiccmp.org> wrote:
> >
> > On Tuesday, April 28, 2020 at 17:56, Tony Duell via cctech wrote:
> >
> >> The HP2748 is a common-ish example of this type of un[i]t.
> >
> > David Collins of the HP Computer Museum and I just recently completed
> > reading some 200+ paper tapes from the museum collection.  He used a
> > 2748 coupled with a custom Arduino-based interface to produce
> > plain-text files containing an octal representation of the tape bytes.
> > We passed these through a small program to convert them to binary
> > files and a second program to verify checksums of those tapes
> > containing relocatable or absolute binary object data.  The resulting
> > files can be used as is with the HP 2100 SIMH simulator or could be
> > punched back into physical paper tapes if desired.
> >
> >                                      -- Dave
> >
>

I have the s100 board Jon Chapman (glitch) created to interface with his HP
2100 reader.  Not sure if anyone here woukd have use for it.

Anyone use the Decitek 2910 or HS1000 portsble model (you can buy from
decitek.com) for archiving 1 inch papertapes?  The 2910's are available
new, they come with older windows/  DOS software, memory buffer, rs232
port, slows to 110b.

For the volume of tapes I have, getting something new is appealing for
reliabikity-sake.

Bill

>


More information about the cctech mailing list