tape baking

[Curious Marc]

Agreed. They sure are pressed in, then riveted in for good measure. You’d have to drill them out first. Not an easy modification. 
Marc

> On Apr 30, 2020, at 2:18 PM, Al Kossow via cctalk <cctalk at classiccmp.org> wrote:
> 
> On 4/29/20 10:01 PM, Curious Marc via cctalk wrote:
>> Or replacing the posts with ones machined from Teflon or Delrin?
> 
> The posts are staked in. You might be able to make tiny rollers to go over the pins
> Their working diameter isn't super critical
>