APL-11

Warner Losh imp at bsdimp.com
Tue Mar 31 16:50:13 CDT 2020


On Tue, Mar 31, 2020 at 8:02 AM Paul Koning via cctalk <
cctalk at classiccmp.org> wrote:

>
>
> > On Mar 31, 2020, at 8:45 AM, Bill Gunshannon via cctalk <
> cctalk at classiccmp.org> wrote:
> >
> > On 3/31/20 8:37 AM, Paul Koning via cctalk wrote:
> >>> On Mar 30, 2020, at 10:30 PM, Mark Matlock via cctalk <
> cctalk at classiccmp.org> wrote:
> >>>
> >>>> According to the Ref Manual, that's the one I was looking for.
> >>>> Now to mount the RL on RSTS and see what it takes to build it
> >>>> there.  I'll let the list know how I make out in case someone
> >>>> else is interested.
> >>>>
> >>>> bill
> >>>   The RL02 image is RSX Files-11, and I’m not sure if you can mount
> that with RSTS. I could move it to a RT-11 formatted RL02 or if your RSTS
> system is on HECnet I can put it where you could get it that way.
> >> RSTS won't read ODS.  It does know how to read RT11 file structure
> (with a standard utility).
> >
> > Problem with that is all the files get jumbled into one directory
> > and I am sure the build will want them in the right proj,uid locations
> > in order to work.  I am thinking a backup tape may do the job.  SPD's
> > seem to say that later versions of RSX and RSTS had compatible BACKUP
> > formats.  We'll see.  If that don't work there is always kermit.  :-)
> >
> > bill
>
> RSTS V9 and later have a BACKUP that's compatible with VMS, so if RSX has
> one also that would work.  And there's DECnet, of course.
>

are the NIC drivers in simh functional enough to create two instances and
DECnet between them?

Warner


More information about the cctech mailing list