RDI BriteLite

[Alan Perry]

According to the label, the BriteLite IPX power input is 18V 3.1A.

alan

On 3/6/20 1:07 AM, Plamen Mihaylov wrote:
> Alan, thank you for the photos. I have no idea it was a proprietary 
> framebuffer. Do you remember what voltage the RDI uses ?
> 
> Best regards,
> Plamen
> 
> On Thu, Mar 5, 2020 at 11:04 PM Alan Perry via cctech 
> <cctech at classiccmp.org <mailto:cctech at classiccmp.org>> wrote:
> 
> 
> 
>     On 3/5/20 7:44 AM, Alan Perry via cctech wrote:
>      >
>      >
>      >> On Mar 5, 2020, at 05:20, Plamen Mihaylov via cctech
>     <cctech at classiccmp.org <mailto:cctech at classiccmp.org>> wrote:
>      >>
>      >>  Does anyone have such machine ? I miss the PSU adapter as well
>     as the Sbus
>      >> framebuffer which connects the LCD panel to the mainboard. Any
>     info is
>      >> appreciated.
>      >
>      >
>      > I had one, but sold it to someone on this list last year.
>      >
>      > I used a generic power supply, one with multiple cord tips and
>     selectable output. However, when I exhibited the BriteLite and had
>     it running all day, the power supply died after a day and a half.
>      >
>      > Good luck on finding a frame buffer for it. I don’t remember the
>     details about it, but I took lots of photos of it.
> 
>     Here is a Flickr album of the insides of what was my BriteLite IPX,
>     including the LCD frame buffer - https://flic.kr/s/aHsmLNnBuU
> 
>     alan
> 
>      >
>      > alan
>      >
>      >
>      >>
>      >> Best regards,
>      >> Plamen
>      >
>