PMI memory error

[Chris Zach]

Yes, same failure. Likewise if I put board 1 in the same dip settings as 
board 0 I get the same failure (and pulling out board 0 the 2mb board)

Running the 2mb memory board here with RT11, seems fine.

C


On 4/23/2020 6:39 PM, Glen Slick wrote:
> On Thu, Apr 23, 2020 at 3:30 PM Chris Zach via cctalk
> <cctalk at classiccmp.org> wrote:
>>
>> Error 47
>> Memory CSR Error
>>
>> Memory Map
>> Starting   Ending       Size in    CSR          CSR     Bus
>> Address    address      K Bytes    address      type    type
>>
>> 00000000 - 07777776     2048       17772100     ECC     PMI
>> 10000000 - 13777776     1024       17772136     ECC     PMI
>>
>> But setting any CSR seems to fault it. Drat.
> 
> Are the CSR dip switches 1-4 all set to 0 on the first MSV11-J and all
> set to 1 on the second one? Did you already try setting CSR dip
> switches 1-4 to 0,0,0,1 on the second one so that the CSR address gets
> mapped to 17772102? That would be the expected CSR address for the
> second one with the first one at 17772100.
> 
> Without trying it on a system myself with two MSV11-J boards I'm not
> sure what happens if the CSR addresses are not at the expected
> locations.
>