Kennedy 9800 - Power-up tips?
Patrick Finnegan
pat at vax11.net
Thu Apr 23 13:21:21 CDT 2020
On Thu, Apr 23, 2020 at 11:59 AM Anders Nelson via cctalk <
cctalk at classiccmp.org> wrote:
> Cool, thanks for your take. I found some articles:
>
> -
>
> http://www.angelfire.com/electronic/funwithtubes/steps_to_first_power_on.html
> - http://www.angelfire.com/electronic/funwithtubes/Restore_cap.html
>
> Given this unit doesn't have any tubes, I imagine the motor drivers/amps in
> this thing would simply go to zero output with shorted caps. The PSU might
> blow the fuse and/or rectifier with a shorted bulk output cap. This unit is
> very difficult to remove from the rack it's in so I'm trying to avoid
> preemptive repairs.
>
I'd personally say that since it hasn't been off for that long (less than 3
years) and since it sounds like you're not interested in taking it apart,
I'd just plug it back in, and see how that goes.
As a minimal step, I might disconnect the PSU from the rest of the drive,
and plug it in like that for a moment, but it's probably best to not run it
without a load for very long.
Pat
More information about the cctech
mailing list