VAXmate PSU

[Matt Burke]

On 07/04/2020 23:34, Rob Jarratt via cctalk wrote:
> I have seen the suggestions to study the waveforms at a much higher
> resolution. What I am doing is setting the overall timebase in the 100ms
> range so that I can trigger on when the 555 starts to oscillate and capture
> the whole period of operation until the SCR triggers. I can then zoom in, as
> can be seen from the trace provided in this email. I hope that is good
> enough, or am I missing some problem with doing it this way?
>

The timebase will also affect the sampling rate (due to the finite
memory depth) so some finer details of the waveform may not be captured
when running at a slower rate.

Matt