Help installing HP 2000 contributed library in simh

[David Williams]

On 2020-04-07 14:36, J. David Bryan via cctech wrote:
> Both Access and F allow the user to input programs by using the paper 
> tape
> reader that's part of the ASR 33 Teletype.  But the simulated terminal
> multiplexer supports only KSR 33 models (no punch or reader).

ASR 33 is what we used in HS. Still have a box of paper tapes from back 
then that I suspect I'll never be able to do anything with again but the 
pack rat in me refuses to let go. Every so often I consider trying to 
decode them again.

For now I'll probably cut/paste a few of the CSL programs I'm most 
interested in and go from there I suppose.

> There's an HP 2000 users' group at:
> 
>   https://groups.io/g/hp2000family
> 
> They might have some additional ideas or know where to locate a 
> compatible
> CSL tape.

That's the old Yahoo group isn't it? I had joined them on Yahoo years 
ago but never did much there.

Any other suggestions of interesting operating systems or software to 
try out besides TSB? Interesting development environments or uncommon or 
unusual languages tend to grab my interest. Not sure what all was 
available for the hardware.

David Williams