SCSI2SD on VMS 5.4

[Rob Jarratt]

> -----Original Message-----
> From: Dave Wade <dave.g4ugm at gmail.com>
> Sent: 16 March 2019 10:41
> To: rob at jarratt.me.uk; 'Rob Jarratt' <robert.jarratt at ntlworld.com>;
'General
> Discussion: On-Topic and Off-Topic Posts' <cctalk at classiccmp.org>
> Subject: RE: SCSI2SD on VMS 5.4
> 
> Rob,
> 
>  Might be an issue with the card. The KZQSA was officially only supported
for
> CD-ROM and Tape.
> 
> http://www.microvax2.org/files/KZQSA%20Jumper%20Settings.htm
> 
> (towards the bottom)...
> ... have you tried with a real SCSI drive?
> 

I thought I remembered something like that but I couldn't find the info.
Thanks for the reminder. I suspect VMS 7.3 maybe works with hard disks on
KZQSA whereas 5.4 perhaps does not. I may try to emulate a CD-ROM to see if
that at least works.

Thanks

Rob