PDP-11/60 manuals needed

[Jay Jaeger]

The PDP-11/60 manuals described below have been scanned, and are
available on my Google Drive using this link:

https://drive.google.com/open?id=0B2v4WRwISEQRWWFFdVpCZWFTZEU

Under ./pdf/dec/1160

Enjoy.



On 2/28/2019 1:19 PM, Noel Chiappa via cctech wrote:
>     > From: Jay Jaeger
> 
>     > I have EK-11060-OP-003: "PDP-11/60 installation and operation manual"
>     > and an update EK-11060-OP-C1.
> 
> Yeah, that's the one I referred to as "the general -11/60 manual"; generally,
> there's one such for all the -11 models, but the exact name varies from model
> to model (unlike, say, the CPU tech manuals, the name for which is pretty
> predictable).
> 
>     > let me know and I will scan it in and stick it on my Google drive in a
>     > day or two or three
> 
> That would be great; thanks very much! No rush at all...
> 
>     > I also have a spare processor handbook, EB-06498-20/77
> 
> We do have that one, thanks.
> 
> BTW, looking a little more closely at the cabinet/power-supply manual
> (pg. 1-7), the KD11-K TM might _only_ be available on fiche. If so, that'll be
> the first time I've ever seen that. Oddly enough, further down the page, the
> FP11-E TM seems to be available in printed form (EK-FP11E-TM).
> 
> 
>     > From: Ethan Dicks <ethan.dicks at gmail.com>
> 
>     > I've seen Tech Manuals printed as 2-up on C-sized paper
> 
> Yeah, generally things from the -11/20 era are like that (e.g. the RK11-C
> manual). Nothing later than that that I've ever seen, though.
> 
>     >>> I have the two BA11 cabinets for an 11/60, the PSUs, and the front
>     >>> panel (I'm missing the rack).
> 
>     > "the rack" is just the outer box with rails (not an H960 - whatever the
>     > designation is for the odd 11/60 cabinet).
> 
> I think it's the H9500 low-boy corporate cabinet, per Chapter 5 in
> the cabinet/power manual.
> 
>     > The backplanes are in the BA11s. I seem to have both MOS and core
>     > memory and, I am fairly sure, an RK611, along with the CPU. I need to
>     > take a module inventory.
> 
> You seem to have most of the crucial bits, although you might be missing
> the power harness.
> 
> Do you have the optional WCS module (M7870)? There are also ROM modules, and
> a diagnostic module, that can go in that slot - only one of the three at a
> time, though.
> 
> 	Noel
>