HP9816 PAL16L8

[dwight]

Do you have a schematic that shows what it does. You could write your own file is not really complicated for a 16L8. I wrote my own for my 6532to6530 adapter for the KIM-1. I'll admit I did a logic mistake the first time but I'd have done the same with palasm.
Dwight
________________________________
From: cctech <cctech-bounces at classiccmp.org> on behalf of Alan Hightower via cctech <cctech at classiccmp.org>
Sent: Saturday, June 8, 2019 10:18 AM
To: General Discussion: On-Topic Posts
Subject: Re: HP9816 PAL16L8


L series are combinatorial only.  You (or someone who has a working one)
should be able to figure out a logic map by either running through all
the input permutation or putting it in a reader that will do the same
(vs reading the fuse data).

-Alan

Good luck.

On 2019-06-08 11:05, Piero Andreini via cctech wrote:
> desperately looking for jedec file of PAL16L8 position U69 part #
> 1820-2991 for my HP9816