simple-ish Arduino-compatible LPC2103 dev kit

dwight dkelvey at hotmail.com
Wed Sep 5 15:26:03 CDT 2018


There are a couple of Forth's that should run on this. Mercrisp is a little on the heavy side for the F103 but does work. I've adapted a EForth for the F407 to run on the F103's limited RAM.

With this, you can avoid learning someones elses debugger and you don't have to have a special loader in the flash, like needed for the Arduino EDI.

Forth is both the loader and debugger. No more compile and burn a little more age of the flash, just to debug your code. One can full test the code in small pieces before committing to flash.

It would require a serial from the LPC2105. I use a FTDI board.

Dwight


________________________________
From: cctalk <cctalk-bounces at classiccmp.org> on behalf of Carlo Pisani via cctalk <cctalk at classiccmp.org>
Sent: Wednesday, September 5, 2018 12:18:50 PM
To: holm at freibergnet.de; cctalk at classiccmp.org; spectre at floodgap.com
Subject: simple-ish Arduino-compatible LPC2103 dev kit

hi guys
a dude has recently posted a link in our forum, he has developed a
simple Arduino-compatible LPC2103 dev kit, the links point to a second
link with documentation, and source

he is also willng to assemble and sell boards

have a look here (1)

cheers
Ivelegacy
(webadming at DownTheBunker)

(1) http://www.downthebunker.xyz/wonderland/reloaded/bazaar/viewtopic.php?f=3&p=373&sid=f80e58f32a291250a3e71666dfb80940#p373


More information about the cctech mailing list