PDP-11 DIV instruction lossage

[Noel Chiappa]

    > I'll have to redo my kludgy fix to gmtime() ... I guess I'll have to fix
    > it for real, instead of my kludgy fix (which extended it to work for
    > 16-bit results). :-)
    > ...
    > And on the -11/23:
    > Note that the returned 'quotient' is simply the high part of the dividend.

Heh. I had decided that the easiest clean and long-lived fix was to just to do
it right, using the long division routine used in the V7 C compiler runtime:

  http://minnie.tuhs.org/cgi-bin/utree.pl?file=V7/usr/src/libc/crt/ldiv.s

and I vaguely recalled reading a DMR story that talked about that, so just for
amusement I decided to re-read it, and looked it up:

  https://www.bell-labs.com/usr/dmr/www/odd.html

(the section "Comments I do feel guilty about"), and it's lucky I did, because
I found this:

  Addendum 18 Oct 1998

  Amos Shapir of nSOF (and of long memory!) just blackened (or widened) the
  spot a bit more in a mail message, to wit:
 
  'I gather the "almost" here is because this trick almost worked... It has a
  nasty bug which I had to find the hard way!

  The "clever part" relies on the fact that if the "bvc 1f" is not taken, it
  means that the result could not fit in 16 bits; in that case the long value
  in r0,r1 is left unchanged. The bug is that this behavior is not documented;
  in later models (I found this on an 11/34) when the result does fit in 16
  bits but not in 15 bits ... which makes this routine provide very strange
  results!'

So this code won't work on an 11/23 either (which bashes the low register of
the pair; above). I'd have been groveling in buggy math, again...

Caveat Haquur (if you're trying to run stock V7 on a /23 or /34)!

       Noel