C3253A HP Envizex P-Series

[Rico Pajarola]

On Sat, Jun 23, 2018 at 11:06 PM, Glen Slick via cctalk <
cctalk at classiccmp.org> wrote:

> On Sat, Jun 23, 2018 at 9:38 AM, Carlo Pisani via cctalk
> <cctalk at classiccmp.org> wrote:
> > (x11 terminal) C3253A HP Envizex P-Series
> >
> > Up for sale is a X-Terminal made by Hewlett Packard in 1995.
> >
> > Tested, in perfect working conditions!!!
> >
> > cpu: i960 @ 33Mhz (it's the fastest available on Envizex v1)
> > ram: 48MB (builtin + 16+16+8, the first two sims need to be equal)
> > rom: none (sorry, It doesn't have any font-rom, it loads fonts from
> tftp/NFS)
> > vram: 2MB
> > lan: 10Mbps BASET RJ45 (it also comes with an AUI port on the back)
> > kb/mouse: common PS/2 (F12 is a special key, but Envizex works on
> > common keyboards, HIL keyboards are also supported)
> > Media: floppy 3.5",1.44MB
> > Software included!
> >
> > It comes with all the documentation, configuration-scripts, and
> > startup for Linux (sorry, I don't have HPUXv10.20/v11, I can't
> > test/adapt scrips).
> >
>
> I also have a C3253A HP Envizex P-Series. I was fortunate to also
> acquire a PCMCIA flash card adapter for it and was able to get it set
> up to boot from a PCMCIA linear flash card. I don't have the optional
> floppy drive in mine.
>
> I have a set of 3 Netstation software CDs that I got from someone else
> on the list a few years ago. I forget if I ever uploaded images of
> these CDs somewhere. For the C3253A HP Envizex P-Series you need
> Version 7.1
>
could you upload them to archive.org? Netstation software is somewhat hard
to find these days.


Netstation Software
> For HP ENVIZEX, ENTRIA and 700/RX
> Version 7.1
> Supported Hosts: HP/SUN/IBM
> Part No. B3651-10117
>
> Netstation Software
> For HP ENVIZEX II and ENTRIA II
> Version 9.1
> Supported Hosts: HP/SUN/IBM
> Part No. B3651-10121
>
> Netstation Software
> For HP Netstations
> Version 7.1/9.1
> Supported Hosts: HP-UX 11.0
> Part No. B3651-10122
>