Epson DECTalk IC

[Anders Nelson]

It takes 9600 (8N1) serial input, and I found a forum thread:

http://www.vcfed.org/forum/archive/index.php/t-34754.html

"The DECTalk was a speech synthesizer (actually there were a few models).
The DTC01 and 03 can do text to speech when fed ascii text over RS232."

Of course you could bypass the MCU on the Adafruit board and feed it with
data however you like, from a VAX bus or other means I don't understand.

=]
--
Anders Nelson

+1 (517) 775-6129

www.erogear.com


On Thu, Jul 26, 2018 at 1:12 PM Zane Healy <healyzh at avanthar.com> wrote:

> That’s pretty cool, and looks like it would work well for a Darkroom
> automation project I have in mind.
>
> From the DECTalk side of things.  Could this take the place of DECTalk
> hardware in a VAX/VMS environment?
>
> Zane
>
>
>
> > On Jul 26, 2018, at 5:23 AM, Anders Nelson via cctalk <
> cctalk at classiccmp.org> wrote:
> >
> > For those wanting some DECTalk in their lives without the bulk:
> >
> >
> https://global.epson.com/products_and_drivers/semicon/products/speech/tts_index.html
> >
> > There's even a ready to go board here:
> >
> > https://www.adafruit.com/product/924
> >
> > =]
> >
> > --
> > --
> > Anders Nelson
> > +1 (517) 775-6129
> > www.erogear.com
>
>