Microvax II 'primer'?
Jon Elson
elson at pico-systems.com
Mon Jan 22 10:49:19 CST 2018
On 01/22/2018 07:43 AM, Jules Richardson via cctalk wrote:
> On 01/21/2018 04:04 PM, Rob Jarratt wrote:
>> You might find that the filter capacitor goes up in smoke
>> soon after you
>> connect the PSU to the mains, even without powering it on.
>
> Yes, Adrian Graham mentioned that (via FB), too. I seem to
> have extremely good luck with the RF filter caps, unlike
> other people, but I'm always prepared for the cloud of
> smoke :-)
>
>> Otherwise it is certainly wise to check the PSU visually
>> for any obviously
>> failed electrolytics. If you have one of the DEC load
>> boards you could
>> connect the PSU to that as a dummy load. I don't think
>> there is much in the
>> way of dependency on the CPU to run the PSU.
>
> At this stage I've got no idea if it's a SMPSU or a linear
> (I've not popped the panel off)... I suppose if it's
> linear then it perhaps doesn't even need a load to do its
> thing. If it's a switcher then I expect it'll at least
> need something on +5V, and maybe +12V too (unless it has
> built-in load resistors to keep the regulation happy, as
> designs occasionally do).
>
All VAX and uVAX main power supplies are switching types.
If you see an electrolytic cap in there with a 200+ V
rating, that's a certain giveaway of a switching supply.
Jon
More information about the cctech
mailing list