New TestFDC Results Registry

[Chuck Guzis]

Will, I wasn't aware the CW MK4+ had a legacy floppy controller on it
(i.e. ports 3fx, DMA 2, IRQ 6 setup with NEC 765 command set).  The CWs
that I have (a MK3 and a MK1) are all sui generis devices not supported
by off-the-shelf software.  In particularly, I don't think they'll work
with, say, IMD, or AnaDisk.

--Chuck


On 01/18/2018 01:17 PM, william degnan via cctalk wrote:
> Does someone have results for the Siliconsonic / Individual computers
> Catweasel MK4 plus?  IF not I will put that on my list of to-do's.
> 
> I added a link to this onto my web site in the links section and the
> archiving info thread.
> 
> Bill
> 
> On Thu, Jan 18, 2018 at 3:46 PM, Adrian Graham via cctalk <
> cctalk at classiccmp.org> wrote:
> 
>>
>>> On 18 Jan 2018, at 15:46, systems_glitch via cctalk <
>> cctalk at classiccmp.org> wrote:
>>>
>>> I'd been trying to reach Dave Dunfield with new TestFDC results since
>>> apparently August with no results. So, I wrote a new TestFDC registry
>> into
>>> my site:
>>>
>>> https://services.theglitchworks.net/ng/testfdc_results
>>
>> Gaaaah, talk about the wrong timing for this XD. I say this because I just
>> bought an AHA-1524CF on various folk’s recommendations (not from here) a
>> couple of weeks ago only to find I still couldn’t really manipulate SSSD
>> images then tonight I read a message on VCFED from our own Chuck Guzis
>> saying there were two controller chips in the 1542CF (national and broken
>> Intel) and I discovered I had a broken Intel one.
>>
>> I may have cussed.
>>
>> Typically all the AHA-1522s are in the US, sigh.
>>
>> Cheers,
>>
>> —
>> Adrian/Witchy
>> Binary Dinosaurs - Celebrating Computing History from 1972 onwards
>> w: binarydinosaurs.co.uk t: @binarydinosaurs
>> f: facebook.com/binarydinosaurs
>>
>>
> 


-- 
--Chuck

Sent from my digital computer