8-Update

[Torfinn Ingolfsen]

FWIW, the easiest way to find out if somebody has made (or has tried
to make) replacement parts for anything that can be 3D-printed is to
go to thingiverse.com with your web browser.
And then search for whatever thing you need (search terms / words are
a separate subject, try as wide or as many as have time for.
When you find a part, look at pictures, comments, makes and so on to
try to figure out if this is a working part or just something somebody
has mad a 3D model of, and never tested.
Some relevant examples:
https://www.thingiverse.com/thing:360853  PDP-8 Panel Switch Toggle
https://www.thingiverse.com/thing:386762  DEC RL-02 Spindle Ground Brush
https://www.thingiverse.com/thing:2454690  PDP Stand - Mount

HTH
On Sun, Dec 16, 2018 at 10:35 PM Al Kossow via cctalk
<cctalk at classiccmp.org> wrote:
>
>
>
> On 12/15/18 11:36 PM, Rod G8DGR via cctalk wrote:
>
> > However I began to think would it be possible to create a close copy of an  8/e out of  modern parts.
>
> Redoing the CPU in obtanium TTL would be desirable.
>
>


-- 
mvh
Torfinn