RK05/BA11 slides

Rob Jarratt robert.jarratt at ntlworld.com
Fri Oct 27 12:42:49 CDT 2017



> -----Original Message-----
> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Noel
> Chiappa via cctalk
> Sent: 27 October 2017 18:25
> To: cctalk at classiccmp.org
> Cc: jnc at mercury.lcs.mit.edu
> Subject: RE: RK05/BA11 slides
> 
>     > From: "Rob Jarratt"
> 
>     > Thanks for this info Noel.
> 
> Sure; I figured it would be useful to someone, glad to know it was.
> 
>     > So it sounds like I would need the C-230-S-124. ... My metalworking
>     > abilities are limited.
> 
> If you don't want to have to do any mods, the C-230-S-122 is a straight
bolt-in,
> albeit $30 or so more than the -124, which requires..
> 
>     > I am not clear from the picture you linked to, what the modification
is?
> 
> Drilling the two holes.
> 
> 	Noel

Ah I misread your email as suggesting that the 124 was more suitable than
the 122, but if the 122 is the better fit then so much the better. My H960
is not very accessible but I attempted to measure it front back and it may
be 25". Do you know where should the length be measured?

Regards

Rob



More information about the cctech mailing list