RL02 Spinup fails

Aaron Jackson aaron at aaronsplace.co.uk
Tue Nov 7 03:14:02 CST 2017


>> On Nov 6, 2017, at 10:21, Aaron Jackson via cctalk <cctalk at classiccmp.org> wrote:
>>
>> I based my terminator off Mark
>> Blair's RL02 to USB project:
>>
>> https://github.com/NF6X/RL02-USB/blob/master/pcbs/RL02-USB-terminator/RL02-USB-terminator.pdf
>
> Hi there! Just one warning: My project stalled after I ordered boards and lost inertia while waiting for them, and I have not yet put together the hardware. Thus, I can’t guarantee that my terminator design is correct yet. I’m glad that it has been deemed to be potentially useful even in its unfinished state, and I sure hope that I haven’t led anybody down the wrong path due to any errors that may be in the design. Good luck!

Hi Mark,

Thanks for your words of caution. :) I think it is correct thought. I
found this old post on classiccmp which seems to agree with your design,
although the pins might be reversed. I've tried it both ways...

             https://marc.info/?l=classiccmp&m=104966057301826&w=2

Thanks,
Aaron.


More information about the cctech mailing list