RE: Extracting files off “unknown” 8 inch disks. Any thoughts…

Rich Alderson RichA at livingcomputers.org
Mon May 8 14:06:30 CDT 2017


From: Eric Smith
Sent: Friday, May 05, 2017 3:27 PM

> On Fri, May 5, 2017 at 3:02 PM, allison via cctech <cctech at classiccmp.org>
> wrote:

>> In the PDP-10 realm not less than a handful Tops10. ITC, more.

> TOPS-10 doesn't have any filesystems for floppy disks, though the KL10
> front-end PDP-11/40 running RSX-20F does, and there are utilities to access
> RSX and RT11 filesystems from TOPS-10.

Unsupported utilities.

Also, RSX-20F can only handle RX01 format.  An RX02 drive can be used, but
not an RX02 format diskette.

> AFAIK, the situation is the same for TOPS-20.  I don't have any idea
> whether ITS, WAITS, Tenex, or the Compuserve Monitor ever had any different
> floppy disk support.

TOPS-20 has no support for the front end RX01, nor does WAITS (which loads the
front end from DECtape, not floppy).  I doubt that TENEX does, since it runs on
KA-10 and KI-10 processors (front ends are loaded from the main processor, not
from their own peripherals).  ITS on the KL-10 is like WAITS, AFAIK:  DECtape,
not floppies.  I can't speak to the CI$ monitor or Tymcom-X.

                                                                Rich


Rich Alderson
Vintage Computing Sr. Systems Engineer
Living Computers: Museum + Labs
2245 1st Avenue S
Seattle, WA 98134

mailto:RichA at LivingComputers.org

http://www.LivingComputers.org/


More information about the cctech mailing list