Need manual for a floppy drive...

[geneb]

On Sun, 29 Jan 2017, Chuck Guzis wrote:

> On 01/29/2017 12:13 PM, geneb wrote:
>
>> I would assume that the jumper configuration I'd set would have done
>> that - it has two settings, "UA" - front led handled by the In Use
>> signal and "DA" - front led handled by the Drive Select signal.  My
>> K4 has a pair of Shugart 455's in it (that work fine), but I REALLY
>> don't want to go to the hassle of pulling a drive out in order to see
>> if the jumper settings match. :)  It may come to that though.
>
>
> Take a look at the drive (I've got a JU-455 here and there's a
> 2-position jumper with positions labeled UA and DA (roughly the middle
> of the PCB, next to the MM/MS jumper.   With UA  jumpered, the LED will
> light only on the INUSE signal; with the DA position, the LED with light
> with drive select.
>
The activity light doesn't work in either setting.

g.

-- 
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
http://www.diy-cockpits.org/coll - Go Collimated or Go Home.
Some people collect things for a hobby.  Geeks collect hobbies.

ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://scarlet.deltasoft.com - Get it _today_!