DEC indicator panel mounting details

[Josh Dersch]

On Tue, Dec 19, 2017 at 2:25 PM, Josh Dersch <derschjo at gmail.com> wrote:

> On Tue, Dec 19, 2017 at 2:15 PM, Al Kossow via cctalk <
> cctalk at classiccmp.org> wrote:
>
>>
>>
>> On 12/19/17 10:49 AM, Noel Chiappa via cctalk wrote:
>>
>> > Could someone who has one please take a look and let us know (or, even
>> better,
>> > send us photos)?
>>
>>
>> If someone can't get to mounted ones, I can trundle over to CHM artifact
>> storage
>> and look at one of our racks.
>>
>> I would think LCM should have some readily accessable, though.
>>
>>
>>
> I will see if I can grab some pictures this afternoon. We have a few
> cabinets that I can take a close look at the innards of.
>
> - Josh
>
>
>
See the pictures at the below link:

https://1drv.ms/f/s!Aqb36sqnCIfMotpQIuc2-tDUva3iBw

It looks to be fairly straightforward; the plastic "ball on post" brackets
are mounted to the rack rails, and there are metal brackets that screw into
the BOP brackets that hold the PCB/lamp assembly.

Hope this is the right assembly for you, if not, or if you have questions,
let me know and I can try to fill in the holes...

- Josh