RL02 to PC image

[william degnan]

On Sat, Dec 16, 2017 at 6:15 PM, william degnan <billdegnan at gmail.com>
wrote:

>
>
> On Sat, Dec 16, 2017 at 6:10 PM, Chris Elmquist via cctalk <
> cctalk at classiccmp.org> wrote:
>
>> On Friday (12/15/2017 at 07:57PM +0000), Henk Gooijen via cctalk wrote:
>> >
>> > I have not yet had time to build/test it, but a few months ago there
>> > was an RL01/RL02 emulator project on VCF.  You need a PDP-11
>> > with RL11 controller. The RL0x emultor connects to the RL11
>> > just as an RL01/RL02 disk drive and you can assign it any drive
>> > number (0 - 3).
>> > But what is really nice is that the emulator cooperates with
>> > real RL drives. So, you can have one real RL0x drive and up
>> > to 3 “emulated” RL drives. The storage is a flash card.
>> > The RT-11) command .COPY DL0:*.* DL1: works (where #0 is real,
>> > and #1 is flash).
>> > After the copy you pull the flash card and copy it on a PC.
>>
>> I am interested in this.  Does anyone have a reference/link to the thread
>> on "VCF"?   Searching for most of these terms has not found me anything...
>> In fact, searching for ANYTHING on VCF finds me nothing.  Curious.
>>
>> Chris
>>
>> --
>> Chris Elmquist
>>
>
> Found it
>

http://www.vcfed.org/forum/showthread.php?58077-DEC-RL01-RL02-disk-emulator-with-PCB-board&highlight=DE10

Bill