Tektronix 4404 servcie manuals needed

[Al Kossow]

On 5/30/16 10:51 AM, Mattis Lind wrote:
> 2016-05-23 18:57 GMT+02:00 Al Kossow <aek at bitsavers.org>:
> 
>>
>>
>> On 5/23/16 9:55 AM, Mattis Lind wrote:
>>
>>> OK. I misunderstood. There were no firmware listed in the
>> adaptec/firmware
>>> directory so I thought this was the problem. I also have the ACB-3530,
>> the
>>> ACB-4070, some Xebec S1410A and some OMTI bridges if there is a need for
>> a
>>> firmware dump.
>>>
>>
>> yea, I should start filling that stuff in. It would be good to get your
>> images
>> to start that.
>>
> 
> I promised dumps of the SCSI bridges that I have. I start with ACB3530 and
> ACB4000A which I have nearby. I cannot guarantee that there are no bit rot
> in them. The ACB4000A has not been used for ages but the ACB3530 I at least
> hooked up with a SCSI host just a few years back.
> 
> https://dl.dropboxusercontent.com/u/96935524/ACB3530-rev-D.hex
> https://dl.dropboxusercontent.com/u/96935524/ACB4000A-rev-B.hex
> 
> I think I have the manuals for the ACB4520, ACB4000A and the ACB4070 in
> addition to the ones that already are on bitsavers. Unless these are
> already digitized somewhere else I could look them up and try to scan them
> if there are interest.
> 
> BTW. The filename for one file is wrong. It says ACB3350A rather than 3530A.
> 
> /Mattis
> 

thanks! it doesn't look like i have the 4000a or 4070 scanned, a little surprising
since I know i have them somewhere. 4520a is in the backlog