Opening up PSU for Olivetti M24

[Robert Jarratt]

> -----Original Message-----
> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of supervinx
> Sent: 24 March 2016 07:19
> To: General Discussion: On-Topic and Off-Topic Posts
> <cctalk at classiccmp.org>
> Subject: R: Opening up PSU for Olivetti M24
> 
> Can't check it now... have you looked under the feet on the bottom? Olivetti
> used to hide screws right there..

I found the secret, it was a screw next to the one holding on an earth lead. With this screw removed the panel could be pivoted away. I have checked it over internally and all the electrolytics look fine and have a good ESR.

Regards

Rob