Reproduction micros

Dave Wade dave.g4ugm at gmail.com
Tue Jul 12 13:24:22 CDT 2016


> -----Original Message-----
> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Kurt K
> Sent: 12 July 2016 19:10
> To: General Discussion: On-Topic and Off-Topic Posts
> <cctalk at classiccmp.org>
> Subject: Re: Reproduction micros
> 
> I haven't heard of these projects.  Do you have a larger list of projects
that
> exist?

I found a list on the MIST site

https://github.com/mist-devel/mist-board/wiki/FPGA-Projects

https://github.com/mist-devel/mist-board/wiki/TheBoard

which is a project to let you run multiple emulations on a single board...

There is also another IBM1130 emulation which is functional rather than
cycle accurate...

http://ibm1130.org/party/v06

Dave

> 
> > On Jul 12, 2016, at 11:41 AM, "Dave Wade" <dave.g4ugm at gmail.com>
> wrote:
> >
> > There is an on-going CoCo 3 in FPGA.
> >
> > http://www.brianholman.com/retrocompute/files/coco3fpga.html
> >
> > Spectrum III
> >
> > http://www.mike-stirling.com/retro-fpga/zx-spectrum-on-an-
> fpga/comment
> > -page-
> > 1/
> >
> > but lots more about
> >
> > Dave
> >
> >> -----Original Message-----
> >> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of
> >> Swift Griggs
> >> Sent: 12 July 2016 17:02
> >> To: General Discussion: On-Topic and Off-Topic Posts
> >> <cctalk at classiccmp.org>
> >> Subject: Reproduction micros
> >>
> >>
> >> I'm probably dreaming, but is anyone aware of DIY efforts or business
> >> ventures aiming to reproduce a classic micro or "next-gen" classic
micro?
> >> I have seen a lot of efforts, but only one quite like that (the
> >> Altair 680
> > project
> >> nails it). I'm just thinking that with 3D printers and FPGA hardware
> > emulation
> >> it's probably not as hard as it once was.
> >>
> >> Here are some similar efforts I'm already aware of.
> >>
> >> Project BreadBox (dead)
> >>
> http://www.lemon64.com/forum/viewtopic.php?t=47834&sid=ae3e721d8d
> >> 800cbe5d6b003afe70d79b
> >>
> >> The truly kick ass MIST. A nice clone of several systems implemented
> >> in
> > FPGA,
> >> but design wise, it's a shabby little metal box. I have one and I
> >> think it
> > really
> >> rocks. I just wish there were more cases and accessories.
> >> http://lotharek.pl/product.php?pid=96
> >>
> >> The Firebee ST clone project
> >> https://en.wikipedia.org/wiki/Atari_Coldfire_Project
> >>
> >> The C64 Joystick clone
> >> https://en.wikipedia.org/wiki/C64_Direct-to-TV
> >>
> >> Commodore.net used to sell PeeCee C64 and Amiga look-a-like clones
> >> dead
> >> link: http://www.commodore.net
> >>
> >> The C-One. A FPGA board to emulate the C64, again no case.
> >> https://en.wikipedia.org/wiki/C-One
> >>
> >> The awesome Altair 680 kit that appears to be a very complete clone
> >> of the system. It comes with a case et al.
> >> http://www.altair680kit.com/
> >>
> >> A bunch of PDP-X replicas in FPGAs with various degrees of usefulness
> >> http://www.aracnet.com/~healyzh/pdp_fpga.html
> >>
> >> These guys are trying to build a NEW Amiga with backward compatibility.
> >> Sounds like a wonderful project. They seem to be pretty far along
> >> with
> > many
> >> prototype boards built. FPGA guts with a real 060' for CPU! They
> >> never
> > seem
> >> to have made boards for sale, though, and there was no effort toward
> >> a complete system design (case, keyboards, etc...). The last noise
> >> they made seems to be in 2007.
> >> http://www.natami.net/
> >>
> >> For consoles there are plenty of clones:
> >> http://segaretro.org/Unlicensed_Mega_Drive_clones
> >> https://www.amazon.com/Hyperkin-Retron-System-GENESIS-Nintendo-
> >> Entertainment/dp/B003O3EFY2
> >>
> >> Then there is the Cray1 remake
> >> http://www.chrisfenton.com/homebrew-cray-1a/
> >>
> >> -Swift
> >



More information about the cctech mailing list