Looking for old connectors

[Tothwolf]

On Sat, 9 Jul 2016, Oliver Lehmann wrote:

> Hi,
>
> for rebuilding a circuit, I'm in need of 3 old connectors used on the 
> original board.

> ######################
>
> The next one is also a power plug - but I have no idea about its AMP
> number or something:
>
> http://pics.pofo.de/gallery3/index.php/S8000/S8000_boards/FINCH-Adapter-Board/IMGP9588
> http://pics.pofo.de/gallery3/index.php/S8000/S8000_boards/FINCH-Adapter-Board/IMGP9589
> http://pics.pofo.de/gallery3/index.php/S8000/S8000_boards/FINCH-Adapter-Board/IMGP9584
>
> Its counterpart is shown here and labled with AMP, but no number:
>
> http://pics.pofo.de/gallery3/index.php/S8000/S8000_case/Disk-Tape-Component/Secrets-S8000/DSCF0366

The header on the board appears to be a Molex KK 396 series header. The 
plug on the wiring harness is an AMP MTA-156 series IDC connector. I'm not 
sure why they mixed and matched connectors, but they both use the same 
size pins with .156" spacing. The Molex header might retain the plug 
better than the AMP header due to the friction lock.

Molex 26-60-5100 KK 396 Header, Right-Angle with Friction Lock, 10 
Circuits, Tin (Sn) Plating

http://www.molex.com/molex/products/datasheet.jsp?part=active/0026605100_PCB_HEADERS.xml
http://www.molex.com/pdm_docs/sd/026605100_sd.pdf
http://www.molex.com/webdocs/datasheets/pdf/en-us/0026605100_PCB_HEADERS.pdf

AMP 640389-0 MTA-156 Friction Lock Headers - Right Angle front bend, .125" 
solder tail

http://www.te.com/usa-en/product-1-640389-0.html
http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Data+Sheet%7F82056_MTA%7F0708%7Fpdf%7FEnglish%7FENG_DS_82056_MTA_0708.pdf%7F1-640389-0